Bag Palletizer Machine

Packaging equipment is used in daily chemical, food, pharmaceutical and other industries, and water filling machines are one type of packaging equipment. The popularity of mechanization has replaced a lot of manual manipulation, and the water filling machine is a very typical example. The structure of the filling machine is relatively simple, but the efficiency is high, and there are many types, which are suitable for different industries.

 
Classified by filling method
Classified by the main form of movement of the packaging container
Classification by degree of automation
 
Classified by filling methodAtmospheric filling machine: A machine that fills liquids into packaging containers under normal pressure. It is suitable for filling liquid products with low viscosity and no gas, such as white wine, vinegar, soy sauce, milk, syrup, etc.
Negative pressure filling machine: a machine that first evacuates the packaging container to form a negative pressure, and then fills the liquid into the packaging container. It is suitable for filling low-viscosity liquid materials, such as oils, syrups, vitamin-containing Beverages, pesticides, and chemical reagents. But it is not suitable for filling aromatic wines because it will increase the loss of wine aroma.
Isobaric filling machine: It is a machine that first inflates the packaging container so that its internal gas pressure is equal to the gas pressure in the liquid storage tank, and then fills the packaging container with liquid. It is suitable for filling gas-containing Beverages such as beer, soda, etc., which can reduce the loss of carbon dioxide gas contained therein. To
Pressure filling machine: A machine that uses external mechanical pressure to fill liquid products into packaging containers. Suitable for filling viscous materials, such as tomato sauce, minced meat, toothpaste, balsam, etc.
 
Classified by the main form of movement of the packaging containerRotary filling machine: After the packaging container enters the filling station, it is driven by the filling machine turntable to rotate around the main vertical axis. It rotates for nearly a week to complete continuous filling, and then the turntable is sent to the capping machine for capping, as shown in the left As shown in the figure. This type of filling machine is widely used in the food and Beverage industries, such as the filling of soda, juice, beer, and milk. This machine is mainly composed of feeding system, bottle feeding system, filling valve, large turntable, transmission system, body, automatic Control and other parts. The filling valve is the key to ensure that the filling machine can work normally.
Linear filling machine: The packaging container moves along a straight straight line and is filled in rows when it is stopped. As shown in the figure on the right, this type of filling machine has a relatively simple structure and is convenient to manufacture, but it occupies a relatively large area. Due to the intermittent movement, the increase in production capacity is limited to a certain extent, so it is generally only used for filling of airless liquid materials. The limitation is relatively large.
 
Classification by degree of automationManual filling: The filling process is all controlled by manual operation, mostly for the filling of airless liquid materials. But it is rarely used at present.
 
Semi-automatic filling machine: In liquid filling, bottle loading and unloading are performed manually, but the filling process is automatic. Generally, it is the filling of gas-containing liquid materials.
Automatic filling machine: This type can be divided into stand-alone automatic machines and combined automatic machines (which can include continuous bottle washing, filling, capping, labeling, boxing and other processes). Among them, the combined automatic machine is suitable for the filling production lines of large and medium-sized factories, such as the filling production lines of Beverages and beer.
 
According to different needs to choose the filling station.

The labeling machine is a very important part of the production process. It is recommended that you understand the working process and precautions of the labeling machine.

An integral part of the labeling machine
The working process of the labeling machine
Points to note in the work process


1、An integral part of the labeling machineThe body of the labeling machine is roughly as follows, the important core control center PLC, electric eye, label winding mechanism, conveyor belt, label stripping mechanism and display screen.
PLC: It is mainly written by program, and the next step is made by sending out instructions by returning the detected signal.
Electric eye: In the labeling machine, there will be an electric eye for measuring objects and an electric eye for measuring labels. The easy-to-understand explanation of the electric eye for measuring objects is to detect the electronic eye that the labeling object has passed through. The standard measuring electric eye is to detect the label output and adjust the accuracy of labeling. Generally, after the object is detected and the signal is returned to the PLC, an instruction is given to pull the label out.
Display screen: It is an interface for man to operate, which is convenient to control the operation and stop instructions of the machine.
Conveyor belt: plays a role in automatically conveying products.
Label peeling mechanism: A mechanism that peels a single label from a roll label and then applies the label to an object.


2、The working process of the labeling machineThe working principle of the labeling machine is to feed the items into the machine on a conveyor at a constant speed. The mechanical fixing device separates the items by a fixed distance, and then pushes the items in the direction of the conveyor belt.
At the beginning, the boxes are fed to the machine at a constant speed on the conveyor belt. The mechanical fixing device separates the boxes by a fixed distance and pushes the boxes to it in the direction of the conveyor belt. The driving wheel intermittently drags the label tape to move, the label tape is pulled out from the reel, and the labeling wheel will press the label tape on the box through the labeling wheel. The label is attached to the box when the labeling wheel moves at the same speed as the box. When the conveyor belt reaches a certain position, the label belt drive wheel will accelerate to a speed matching the conveyor belt, and after the label is applied, it will decelerate to a stop.


3、Points to note in the work processTake protective measures
Hands, arms and other parts of the body must leave the working part of the labeling machine, and the body must not exceed the safety range. If there are special circumstances, such as maintenance or something, take protective measures.


Pay attention to the details of wearing
When operating the machine, you must be focused, the clothes must be suitable, and do not wear clothes with straps. And if it’s a girl, be careful with your hair.
Check the condition of each part in advance.
Before it works, it must be ensured that the correct raw materials are used and properly prepared. In addition, tighten the bolts, screws and every mechanical part, and check the environment of the labeling machine. There must be no flammable and explosive materials on site.


The above is some information shared by our company. If you want more detailed information, please inquire.

If you want to maximize the efficient production capacity of the blow molding machine in your company, the relevant personnel should know how to use it and the correct way to use it. So let's find out.

The use process of the bottle blowing machine
The operating steps of the blow molding machine
Use the bottle blowing machine correctly


1. The use process of the bottle blowing machineWarm up
The use process of the blow molding machine can be divided into two steps. The first step is to warm up. The main process is to irradiate the preform through an infrared high-temperature lamp, and the preform is heated and softened. It is very important to pay attention to the fact that the preform mouth does not need to be heated in order to maintain the shape of the mouth, so a certain cooling device is required to cool it.
Blow molding
The second step is to place the preheated preform in the blow mold, and perform high-pressure inflation to blow the preform into the required bottle. Such a bottle is complete.


2. The operating steps of the blow molding machineBlow molding machines can be divided into many types according to different classification standards, but basically their working process is similar, so the operation steps can almost be summarized into the following steps.
Step 1. Place the preform in the preform container and transport it to the preform positioning device via the conveying device.
Step 2. Put the preform mouth upward, load the preform onto the holder, and then send it into the drying tunnel.
Step 3. After being heated by the infrared high-temperature lamp, the preform is sent to the blowing platform, and then the mold is locked. After undergoing low-pressure blowing, high-pressure blowing, and exhaust, the mold can be opened finally.
Step 4. The finished bottle is taken off the bottle blowing platform by the automatic demoulding system, so that a bottle is finished.


3. Use the bottle blowing machine correctlyThe matching sets of the bottle blowing machine production line must be matched with each other, and each equipment can fully play its role to ensure the coordination ability of each equipment on the production line.
The specification and model of the bottle blowing machine should be selected according to the specifications of the product. For example, if you only need to write one word, but take a piece of A4 paper, it must be overkill and not a wise choice.
For the corresponding technical operators, adequate training is required. Let them understand the structure, function, production capacity and maintenance capabilities of the equipment, and fully ensure that the blowing machine can maintain the best working condition for a long time.
The blowing machine must have a suitable production environment. Regular equipment maintenance is also required to extend the life of the equipment.


The working life of machinery and equipment, the level of production efficiency and the quality of products are all related to the manufacturing quality of the equipment and the selection of equipment specifications. Therefore, it is very important to understand and be able to operate the blow molding machine correctly. Therefore, the ability of the operators must be strictly required and assessed, so as to give full play to the value of the bottle blowing machine.

The large barrel water canning production line is an automatic canning machine production line produced by the introduction of the production technology and process of the American company, integrating the advantages of similar products in Italy, France and other countries. The technology is improved. The equipment is advanced in technology, reliable in performance, and technological process. It is scientific, good in food hygiene, high in production automation, and easy to operate. It is an ideal canning equipment for beverage manufacturers and is well received by the food and beverage industry. So what are the precautions when installing it? Take the 200-2000ml small pure water canning machine as an example, what are its characteristics? Which water canning machines will the company provide?

 
What are the precautions for installing the water canning machine?
Taking the 200-2000ml small pure water canning machine as an example, what are the characteristics of the water canning machine?
Which water canning machines will the company provide?
 
What are the precautions for installing the water canning machine?1. After the machine is unpacked, first check whether the random technical data is complete and whether the machine is damaged during transportation, so as to solve it in time.
2. Install and adjust the feeding component and the discharging component according to the outline diagram in this manual.
3. Add new lubricant to each lubrication point.
4. Rotate the machine with the shaker to check whether the machine is running in the correct direction (counterclockwise when facing the motor shaft), and the machine must be grounded.
 
Taking the 200-2000ml small pure water canning machine as an example, what are the characteristics of the water canning machine?1. Adopt the direct connection technology of the air supply and the bottle moving wheel; the screw and the conveyor chain are eliminated, which makes it easier to change the bottle shape.
2. The bottle body transmission adopts snap-on bottleneck technology, the bottle body change does not need to adjust the equipment level, just change the relevant bending plate, wheel hub and nylon parts.
3. The specially designed stainless steel bottle washing machine clamp is firm and durable, and does not touch the screw position of the bottle mouth, which avoids secondary pollution.
4. High-speed and large-gravity flow valve canning valve, fast canning speed, accurate canning, no liquid loss.
5. When the bottle is discharged, the spiral descends to change the bottle shape without adjusting the height of the conveyor chain.
6. The host adopts advanced PLC automatic control technology, and the key electrical components are from famous companies such as Mitsubishi, Schneider, and Omron.
 
Which water canning machines will the company provide?Our company (Zhangjiagang Sikai Machinery Co., Ltd.) has a variety of water canning machines, mainly: 200-2000ml small pure mineral water canning machine, 6000BPH bottled water canning machine, automatic three-in-one bottled water canning machine, 6000BPH industrial plastic bottle canning machine, beverage plastic bottle canning machine, 3L mineral water bottle canning machine, etc. If you want to buy a water canning machine, our company can provide you with different types of water canning machines.
 
If you want to buy a water canning machine, you can consider our company, which will provide you with the best products and services.

We provide one-stop beverage filling solution for customer customization requirements.
Step1:Customized Machine Design
Step2:Can Filling Different Drinks
Step3:Online Reporting Of Machine Production Progress