Views:0 Author:Site Editor Publish Time: 2020-11-17 Origin:Site
If you want to maximize the efficient production capacity of the blow molding machine in your company, the relevant personnel should know how to use it and the correct way to use it. So let's find out.
The use process of the bottle blowing machine
The operating steps of the blow molding machine
Use the bottle blowing machine correctly
The use process of the blow molding machine can be divided into two steps. The first step is to warm up. The main process is to irradiate the preform through an infrared high-temperature lamp, and the preform is heated and softened. It is very important to pay attention to the fact that the preform mouth does not need to be heated in order to maintain the shape of the mouth, so a certain cooling device is required to cool it.
The second step is to place the preheated preform in the blow mold, and perform high-pressure inflation to blow the preform into the required bottle. Such a bottle is complete.
Blow molding machines can be divided into many types according to different classification standards, but basically their working process is similar, so the operation steps can almost be summarized into the following steps.
Step 1. Place the preform in the preform container and transport it to the preform positioning device via the conveying device.
Step 2. Put the preform mouth upward, load the preform onto the holder, and then send it into the drying tunnel.
Step 3. After being heated by the infrared high-temperature lamp, the preform is sent to the blowing platform, and then the mold is locked. After undergoing low-pressure blowing, high-pressure blowing, and exhaust, the mold can be opened finally.
Step 4. The finished bottle is taken off the bottle blowing platform by the automatic demoulding system, so that a bottle is finished.
The matching sets of the bottle blowing machine production line must be matched with each other, and each equipment can fully play its role to ensure the coordination ability of each equipment on the production line.
The specification and model of the bottle blowing machine should be selected according to the specifications of the product. For example, if you only need to write one word, but take a piece of A4 paper, it must be overkill and not a wise choice.
For the corresponding technical operators, adequate training is required. Let them understand the structure, function, production capacity and maintenance capabilities of the equipment, and fully ensure that the blowing machine can maintain the best working condition for a long time.
The blowing machine must have a suitable production environment. Regular equipment maintenance is also required to extend the life of the equipment.
The working life of machinery and equipment, the level of production efficiency and the quality of products are all related to the manufacturing quality of the equipment and the selection of equipment specifications. Therefore, it is very important to understand and be able to operate the blow molding machine correctly. Therefore, the ability of the operators must be strictly required and assessed, so as to give full play to the value of the bottle blowing machine.